Safety Precautions

Stain removal often involves cleaners, solvents, or bleach. These precautions apply to every BlotLab guide. They are well-established safety practices, not the results of BlotLab tests — we have not tested these methods ourselves yet.

Check the care label first

The care label is the manufacturer’s instruction for that item. Follow it if it says dry clean only or no chlorine bleach. “Dry clean only” means this is not a job for home laundry products — blot up what you can, skip the extra chemicals, and take the piece to a cleaner. “No chlorine bleach” means do not use chlorine bleach, even if the fabric looks white or the stain looks stubborn. If there is no label, or you cannot read it, treat the item as if it needs gentle care and stop if you are unsure.

Test first

Even a familiar product can change the color or finish of a particular fabric. Test any remover on a hidden spot, such as a seam allowance or inside hem, before treating the stain. Use a small amount, wait, and check for color change or damage. If you can, let the test area dry before you decide, because some color changes show up only after the fabric has dried. If the hidden spot looks worse, stop and use a different method, or take the item to a professional.

Never mix cleaning products

Never mix cleaning products. Combining the wrong ones can release dangerous fumes. Especially never mix chlorine bleach with ammonia, with vinegar or any acid, or with rubbing alcohol.

If you try a second product, do not layer it on the fabric. Rinse the fabric thoroughly in between so the first product is gone before the next one goes on. That includes moving from a detergent treatment to vinegar, alcohol, ammonia, or bleach. Never add vinegar or rubbing alcohol to a wash load that has chlorine bleach in it.

For a fuller list of combinations to avoid, see What never to mix.

If anyone breathes fumes

If anyone breathes fumes, get them to fresh air right away and call Poison Control at 1-800-222-1222 (US). If it is an emergency, also call your local emergency number.

Ventilation and protection

Work in a well-ventilated area — open a window or work where air can move, especially if you are using a solvent, bleach, or another strong cleaner. Follow each product’s label for gloves and eye protection. Product labels differ, so use what that label tells you to use rather than guessing.

Solvents

Solvents (dry-cleaning fluid, rubbing alcohol, acetone) can be flammable or poisonous. Acetone is the solvent in many nail polish removers. Keep them away from flames, sparks, and heat, including pilot lights and hot tools. Use them only with good ventilation, and keep them away from children and pets.

Never pour dry-cleaning solvent into a washing machine. After solvent treatment, rinse the item thoroughly and let it air-dry before washing, and wash only if the care label allows it. Putting solvent-wet fabric, or leftover solvent, into a washer can be hazardous.

Watch the heat

Do not machine-dry or iron the item until the stain is completely gone. Heat can set stains, including wine, coffee, blood, grease, ink, and grass, and a set stain is often much harder — or impossible — to remove. Air-dry and inspect the area first. If a mark is still there, treat it again before any heat goes near the fabric.

Bleach warnings

Chlorine bleach must not be used on silk, wool, spandex/elastane, or blends of these, or on anything labeled no chlorine bleach. It can damage those fibers and can also harm colors when the label does not allow it.

When bleaching, treat the whole garment, never just a spot. Spot-bleaching can leave a light or damaged patch that will not match the rest of the item. Never pour bleach full strength onto fabric. Dilute it and use it only as the product label directs, and only when the care label says it is safe. Don’t soak cotton in chlorine bleach for more than 15 minutes for stain removal.

Know when to stop

Some items are not good candidates for home treatment. For dry-clean-only items, leather, suede, antique or structured pieces, take the item to a professional. Structured pieces include things like tailored jackets, items with padding, interfacing, or special finishes, and anything you would not want to risk shrinking, stiffening, or staining further.

Tell the cleaner what the stain is and what the fabric is, and mention any product you have already tried. The sooner a professional sees a delicate or expensive item, the better the chance of saving it.

Some stains can’t be removed

Some stains can’t be removed, even by professionals. If you have tried the careful steps in a guide and a mark remains, or if the stain looks permanent, stop before you use harsher chemicals. A professional cleaner may still be able to help, but even they cannot save every item.

These precautions appear on every BlotLab page so they are in reach when you need them. If a guide’s steps and this page ever seem to disagree, follow the care label and these safety rules first.