Deodorant and antiperspirant stains
UGA Extension says deodorants and antiperspirants that contain aluminum chloride are acidic and can change the color of some dyes. Texas A&M AgriLife Extension says aluminum or zinc residue may be impossible to remove, so the original color may not come back.
These steps are compiled from the sources cited below. BlotLab has not tested these methods ourselves yet. BlotLab test photos coming soon.
New to stain removal? Start with Stain Removal Basics.
Quick answer
Rub undiluted hand dishwashing liquid into the stain, then launder. If it remains, UGA Extension suggests a bleach or hydrogen peroxide, as the fabric allows. Never iron or apply heat to a deodorant stain.
What not to do
- Never iron or apply heat to a deodorant stain. UGA Extension says the chemical and heat together can ruin most fabrics.
- Never combine vinegar with chlorine bleach.
Supplies
- Hand dishwashing liquid
- Liquid laundry detergent
- A stain remover
- Chlorine bleach, oxygen bleach, or hydrogen peroxide, as the fabric allows
- A commercial cleaner (solvent-based)
- White vinegar
Fresh vs. set-in stain
Our sources do not give separate steps for fresh deodorant stains. For old stains where the color has changed, UGA Extension suggests a few drops of white vinegar (see the steps below). Follow the care label.
Cotton, linen, and other washable fabrics
Spandex, polyester, nylon, acetate, rayon, and other sensitive fabrics
- Spandex/elastane: don’t use chlorine bleach; it melts at fairly low heat; use low heat or air-dry.
- Polyester, nylon, acrylic and similar synthetics: they attract oil stains, so treat oil promptly; they are heat-sensitive, so avoid hot dryers and irons; follow the care label for water temperature.
- Acetate: dissolves in acetone (nail polish remover); never use acetone on it.
- Acrylic and modacrylic: can be damaged by acetone or paint thinner.
- Blends: follow the care for the most delicate or heat-sensitive fiber.
- Rayon: heat-sensitive; follow the care label.
- UGA Extension: rub undiluted hand dishwashing liquid into the stain. Launder.
- If the stain remains, use chlorine bleach, an oxygen bleach, or hydrogen peroxide, as the fabric allows. (UGA names sodium perborate, an older type of oxygen bleach; follow the product label.) Do not use chlorine bleach on silk, wool, or spandex. Rinse between products.
- Or sponge the back of the stain with a commercial cleaner and rub in full-strength hand dishwashing liquid. A commercial cleaner like this is a solvent-based product. Use it in a ventilated area away from flames, and follow the product label. Rinse and air-dry the item before washing, and never put solvent in the washer. Rinse, and repeat until the stain is gone.
- Texas A&M AgriLife Extension: apply liquid detergent, massage it into the fabric, rinse, and wash in warm water. Or pretreat with a stain remover for 5 to 10 minutes.
- If the color has changed on an old stain, UGA Extension suggests a few drops of white vinegar to try to restore it. On cotton or linen, dilute it 2 parts water to 1 part vinegar.
- Check the item. Aluminum or zinc residue may not come out.
Delicates (silk or wool)
- Take silk or wool to a professional cleaner. See When to call a professional, below.
Carpet or upholstery
Not applicable. This guide covers clothing and other washable fabrics only. Our sources do not give carpet or upholstery steps for deodorant.
When to call a professional
Take the item to a professional cleaner if it is dry-clean only, leather, suede, antique, or a structured garment (for example, a tailored jacket or anything with padding or a special finish). Also get help if a mark remains on silk or wool, or if the stain looks permanent or deeply set. Tell the cleaner what the stain is and what the fabric is, and mention anything you have already tried.
For deodorant on silk or wool, use a professional cleaner.
Sources
We compiled these steps from the following published guides. We have not independently verified every product or method in a BlotLab test.